This ia a genuine AAM axle bearing kit for the 7.5 and 7.6 rear axles found in 1992-2005 Chevy S10’s and Blazers also GMC S15’s. This kit includes all parts necessary to replace the axle bearings and seals on both sides. The common part numbers for the bearings is 5707 and the seals are 8660S. This kit also includes the axle C-clips. This kit can also be used for the 7.5 or 7.6 rear axle in Chevrolet Camaro and Pontiac Firebird applications.
1992-2005 Chevy GMC S10 S15 Axle Bearing & Seal Kit 7.5/7.6 GM7.5 GM7.6
$35.00
- SKU: 74050009
- Brand: AAM American Axle Manufacturing
- Weight: 2.0
- Shipping: Calculated at checkout
Weight | 2.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “1992-2005 Chevy GMC S10 S15 Axle Bearing & Seal Kit 7.5/7.6 GM7.5 GM7.6”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | S10 | 1992 - 1993 |
GM/Chevy | S10 | 1994 - 1995 |
GM/Chevy | S10 | 1996 - 1997 |
GM/Chevy | S10 | 1998 - 1999 |
GM/Chevy | S10 | 2000 - 2001 |
GM/Chevy | S10 | 2002 - 2003 |
GM/Chevy | S10 | 2004 - 2005 |
GM/Chevy | S15 | 1992 - 1993 |
GM/Chevy | S15 | 1994 - 1995 |
GM/Chevy | S15 | 1996 - 1997 |
GM/Chevy | S15 | 1998 - 1999 |
GM/Chevy | S15 | 2000 - 2001 |
GM/Chevy | S15 | 2002 - 2003 |
GM/Chevy | S15 | 2004 - 2005 |
Related products
Axles & Axle Bearings
This is a genuine Dana right hand inner axle for the disconnect side of a Dodge 3/4 or 1 ton truck. This is the one that runs from the differential to the discconnect on the passenger side front axle. this fits trucks from 2000-2002. This one has larger splines where the slide collar splines on [...]
View DetailsAxles & Axle Bearings
AAM Rear Axle Bearing & Seal kit 1/2 ton Chevy GMC Truck Tahoe Suburban 1990+
This is a genuine AAM axle bearing and seal kit for 1 side that fits 1990 and newer Chevy trucks and SUVs. This kit also includes a new c-clip for the axle. This is the same as bearing number 513067 and seal 4762N at your local parts store. 2 kits are required per vehicle.
View DetailsAxles & Axle Bearings
AAM 1999+ GM 9.5 9 1/2″ 14 Bolt Rear Axle Shaft 2 Wheel Drive 2wd or 4wd 33 Spline 8 Lug Disc Brakes
This is a genuine AAM rear axle shaft that fits some 2 or 4 wheel drive GM 3/4 ton trucks with the 9.5 rear differential 1999-2004 with rear disc brakes. This axle is 33 1/2″ long and 8 lug and 33 splines. Please check length or part number before ordering as there are several different [...]
View DetailsAxles & Axle Bearings
AAM 9.25 Dodge Ram RH Right Front Inner Axle Shaft 4X4 2003-2009
This is a genuine AAM right hand inner axle shaft for the front of a Dodge Ram 3/4 or 1 ton truck from 2003-2009. This axle is 38″ long from the center of the u-joint to the tip of the splines. This is set up for the 1485 series u-joint.
View DetailsAxles & Axle Bearings
AAM Rear Axle Shaft 2 or 4 Wheel Drive 1999-2007 GM Chevy 1/2 ton Trucks SUV’s 8.6 10 Bolt 6 Lug
This is a genuine AAM rear axle shaft that fits GM 1/2 ton trucks Suburban and Tahoe with the 8.6 rear differential 1999-2005 with rear disc brakes and 2006-2007 with rear disc or drum Brakes. This axle fits 2 and 4 wheel drive applications. This axle is 33 9/16″ long and 6 lug. This axle [...]
View DetailsAxles & Axle Bearings
This genuine Dana front outer stub axle fits Dodge 1/2 ton trucks from 1994-2001 with the Dana 44 front axle. this axle is 6.77 long from the center of the u-joint to the tip of the splines and is 1.41 33 spline. If you are not sure of this part number you can call or [...]
View DetailsAxles & Axle Bearings
AAM Dodge Ram 9.25 Front Axle Assembly LH Left 2010-2013 3/4 & 1 Ton 2500 3500 4X4
This is a genuine AAM leftt front axle assembly for the 2010-2013 Dodge Ram 2500 and 2500 series trucks with the 9.25 4X4 front axle. These use the 1555 series u-joints and come fully assembled as pictured. The Dodge part number is 68065427AB.
View DetailsAxles & Axle Bearings
These are genuine Dana outer stub axles that show to fit 2000-2002 Dodge 3/4 and 1 ton trucks with the Dana 60 front differentials. These are 1.41 33 spline and 7.39 from the center of the u-joint to the tip of the threads. If you aren’t sure about the part number for you application you [...]
View Details
Reviews
There are no reviews yet.