This is a genuine Dana 35 clutch pack for a Track Lok differential in a Jeep. This kit includes enough clutches to do both sides. This kit will also fit the Dodge 8.25 rear differential with a Track Lok differential.
Dana 35 Clutch Pack Track Lok Limited Slip Posi Differential Jeep Dodge 8.25 C8.25
$65.00
- SKU: 707165X
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
Weight | 3.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 35 Clutch Pack Track Lok Limited Slip Posi Differential Jeep Dodge 8.25 C8.25”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 1500 | 1976 - 1977 |
Dodge Ram | 1500 | 1978 - 1979 |
Dodge Ram | 1500 | 1980 - 1981 |
Dodge Ram | 1500 | 1982 - 1983 |
Dodge Ram | 1500 | 1984 - 1985 |
Dodge Ram | 1500 | 1986 - 1987 |
Dodge Ram | 1500 | 1988 - 1989 |
Dodge Ram | 1500 | 1990 - 1991 |
Dodge Ram | 1500 | 1992 - 1993 |
Dodge Ram | 1500 | 1994 - 1995 |
Dodge Ram | 1500 | 1996 - 1997 |
Dodge Ram | 1500 | 1998 - 1999 |
Dodge Ram | 1500 | 2000 |
Jeep | Wrangler | 1987 - 1988 |
Jeep | Wrangler | 1989 - 1990 |
Jeep | Wrangler | 1991 - 1992 |
Jeep | Wrangler | 1993 - 1994 |
Jeep | Wrangler | 1995 - 1996 |
Jeep | Wrangler | 1997 - 1998 |
Jeep | Wrangler | 1999 - 2000 |
Jeep | Wrangler | 2001 - 2002 |
Jeep | Wrangler | 2003 - 2004 |
Jeep | Wrangler | 2005 |
Related products
Small Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and 2003 and newer Dodge trucks with either the 10.5 or 11.5 rear end. This is for the yoke with the factory wear sleeve on it
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View Details
Reviews
There are no reviews yet.