This is a lower bearing kit for a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the early 1990’s. The bearing number is 23100 and the race is 23256. These are Timken Bearings. One kit will do both sides.
Dana 60 King Pin Lower Bearing Kit GM Chevy Ford Dodge 4X4 Front Axle
$93.00
- SKU: 706150X
- Brand: Dana/Spicer
- Weight: 3.0
- Shipping: Calculated at checkout
Weight | 3.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 King Pin Lower Bearing Kit GM Chevy Ford Dodge 4X4 Front Axle”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | W350 | 1973 - 1974 |
Dodge Ram | W350 | 1975 - 1976 |
Dodge Ram | W350 | 1977 - 1978 |
Dodge Ram | W350 | 1979 - 1980 |
Dodge Ram | W350 | 1981 - 1982 |
Dodge Ram | W350 | 1983 - 1984 |
Dodge Ram | W350 | 1985 - 1986 |
Dodge Ram | W350 | 1987 - 1988 |
Dodge Ram | W350 | 1989 - 1990 |
Dodge Ram | W350 | 1991 - 1992 |
Dodge Ram | W350 | 1993 |
GM/Chevy | K30 | 1973 - 1974 |
GM/Chevy | K30 | 1975 - 1976 |
GM/Chevy | K30 | 1977 - 1978 |
GM/Chevy | K30 | 1979 - 1980 |
GM/Chevy | K30 | 1981 - 1982 |
GM/Chevy | K30 | 1983 - 1984 |
GM/Chevy | K30 | 1985 - 1986 |
GM/Chevy | K30 | 1987 - 1988 |
GM/Chevy | K30 | 1989 - 1990 |
GM/Chevy | K30 | 1991 |
Related products
Small Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View DetailsSmall Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
GM 9.5 Rear Pinion Yoke Seal 1998+ AAM 3/4 ton Truck Dodge 4X4 Front 2500 3500 9.25 Front 2003+
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and SUV’s with either the 9.5 rear end. This is for the yoke with the factory wear sleeve on it. This also fits Dodge 3/4 and 1 ton 4X4 trucks 2003 and newer with the AAM 9.25 front axle. These [...]
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
Reviews
There are no reviews yet.