This is a genuine Dana/Spicer drive axle flange for a Dana 60 4X4 front axles with the fulltime front end. These were used in GM, Ford, and Dodge applications with the 30 spline outer axle, which is stock for most applications. These have 55 outer splines where it goes into the hub.
Dana 60 30 Spline Axle Drive Flange Cog Gear Slug Fulltime 4X4 Front Hub GM Ford Dodge
$65.00
- SKU: 37994
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
2 in stock
Weight | 2.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 30 Spline Axle Drive Flange Cog Gear Slug Fulltime 4X4 Front Hub GM Ford Dodge”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | K30 | 1973 - 1974 |
GM/Chevy | K30 | 1975 - 1976 |
GM/Chevy | K30 | 1977 - 1978 |
GM/Chevy | K30 | 1979 - 1980 |
Related products
Miscellaneous
This is a genuine Dana tone ring for a Dana 60 rear differential. This works on both Ford and Dodge applications.
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsMiscellaneous
This is a genuine AAM rear hub nut for the GM & Dodge 14 bolt full floating rear axles. This includes the 10.5 and 11.5″ ring gears. This is a 6 pin nut that uses the internal key to keep it in place. We also have the keys and retainers for this setup.
View DetailsThis is a genuine AAM tone ring for the Dodge 11.5 rear differential found in 3/4 and 1 ton trucks from 2003 to present. This fits on the differential carrier right next to the ring gear.
View DetailsThis is a genuine AAM rear hub nut for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is the 9 pin nut as opposed to the earlier 6 pin design. This nut uses a retainer (40096297) that snaps onto the nut to hold the key (40082234) in [...]
View DetailsThis is a genuine Dana Hydra Lok or Vari Lok limited slip differential plenum. This mounts on the side of the differential underneath the bearing. It is easy to damage the original part while removing the bearing.
View DetailsThis is a genuine AAM front differential lock t-tab. This is the tab that locks the side adjusters in place. There are 2 required per differential. This style was used from 1988-2006. The GM part number was 3727182. We also have the round style for 2007+.
View DetailsThis is a genuine Dana tone ring for a Dana 70 rear differential. This works on both Ford and Dodge applications
View Details
Reviews
There are no reviews yet.