This is a genuine Dana/Spicer drive axle flange for a Dana 60 4X4 front axles with the fulltime front end. These were used in GM, Ford, and Dodge applications with the 35 spline outer axle, which wasn’t stock for most applications. These have 55 outer splines where it goes into the hub.
Dana 60 35 Spline Axle Drive Flange Cog Gear Slug Fulltime 4X4 Front Hub GM Ford Dodge
$70.00
- SKU: 620861
- Brand: Dana/Spicer
- Weight: 2.0
- Shipping: Calculated at checkout
Weight | 2.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 35 Spline Axle Drive Flange Cog Gear Slug Fulltime 4X4 Front Hub GM Ford Dodge”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | K30 | 1973 - 1974 |
GM/Chevy | K30 | 1975 - 1976 |
GM/Chevy | K30 | 1977 - 1978 |
GM/Chevy | K30 | 1979 - 1980 |
Related products
This is a genuine Dana wedge shaped key that drives into the nylon part of the lock nut on a Dana 70 or 80 full floating rear axle found in Dodge, Ford, and GM trucks.
View DetailsThis is a genuine AAM ring gear bolt for the 11.5 rear differential found in 1999 and newer GM 3/4 and 1 ton trucks as well as 2003 and newer Dodge Ram 2500 and 3500 series trucks. 12 required per vehicle. These are right hand thread. The new AAM part number is 40022812.
View DetailsThis is a genuine AAM retaining ring that hold the lock key inside the rear hub nut on GM & Dodge 10.5″ and 11.5″ axles. We also have the key and nut available.
View DetailsThis is a genuine Dana tone ring for a Dana 70 rear differential. This works on both Ford and Dodge applications
View DetailsThis is a genuine AAM cover gasket that fits 2003-2012 Dodge Ram 3/4 and 1 ton trucks with the 9.25 front differential. We have shipping weight listed as 2 lbs. because this will ship in a fairly large box.
View DetailsMiscellaneous
This is a genuine AAM rear hub nut for the GM & Dodge 14 bolt full floating rear axles. This includes the 10.5 and 11.5″ ring gears. This is a 6 pin nut that uses the internal key to keep it in place. We also have the keys and retainers for this setup.
View DetailsMiscellaneous
This is a genuine Dana tone ring for a Dana 80 rear differential. This works on both Ford and Dodge applications.
View DetailsMiscellaneous
Ford Dana 80 & 10.25 10.5 Rear Axle Ratchet Hub Nut Ratcheting Spindle 2″ Right RH Thread
This is a genuine Dana ratchet style hub nut used on the Ford Dana 80 or 10.25 and 10.5 rear full floating axles. This one has right hand threads.
View Details
Reviews
There are no reviews yet.