This is a genuine Tremec clutch fork pivot ball stud that screws into the bellhousing on 1983-2001 Ford Muastangs with the T5, T45, or TR3650 5 speed transmissions.
Borg Warner Tremec T5 T45 TR3650 Ford Mustang Clutch Fork Pivot Ball 1983-2004 5.0 4.6 V8 V6
$20.00
- SKU: 1381146001
- Brand: Tremec
- Weight: .40
- Shipping: Calculated at checkout
Weight | .40 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Borg Warner Tremec T5 T45 TR3650 Ford Mustang Clutch Fork Pivot Ball 1983-2004 5.0 4.6 V8 V6”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | Mustang | 1983 - 1984 |
Ford | Mustang | 1985 - 1986 |
Ford | Mustang | 1987 - 1988 |
Ford | Mustang | 1989 - 1990 |
Ford | Mustang | 1991 - 1992 |
Ford | Mustang | 1993 - 1994 |
Ford | Mustang | 1995 - 1996 |
Ford | Mustang | 1997 - 1998 |
Ford | Mustang | 1999 - 2000 |
Ford | Mustang | 2001 - 2002 |
Ford | Mustang | 2003 - 2004 |
Related products
This is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 10.5 rear axle in GM trucks for 1973-2010. This snap ring measures 3 1/2″ O.D.
View DetailsMiscellaneous
This is a genuine Dana tone ring for a Dana 60 rear differential. This works on both Ford and Dodge applications.
View DetailsThis is a genuine AAM front axle disconnect kit for 2001 and newer 3/4 and 1 ton GM 4X4 trucks with the 9.25IFS front differential. This kit includes the actuator and most wear items associated with the front differential.
View DetailsThis is a genuine AAM retaining ring that hold the lock key inside the rear hub nut on GM & Dodge 10.5″ and 11.5″ axles. We also have the key and nut available.
View DetailsThis is a genuine AAM rear hub nut retainer for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is for the 9 pin nut as opposed to the earlier 6 pin design. This retainer snaps onto the nut (40091019) to hold the key (40082234) in place under [...]
View DetailsMiscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View DetailsThis is a genuine Dana Hydra Lok or Vari Lok limited slip differential plenum. This mounts on the side of the differential underneath the bearing. It is easy to damage the original part while removing the bearing.
View Details
Reviews
There are no reviews yet.