This is a genuine Dana/Spicer pinion nut that fits various applications including some Dana 30 and 44 JK Jeeps and Ford 10.25/10.5 rear ends. Also fits AMC 20 rear ends. This was also uses on some New Process transfer cases including 205 (with 32 spline shaft) 208, 241, 243, 271, and 273 front output shafts. These use a 1 1/8″ socket. This replaces Dana part number 2001153 for the Jeep JK.
Dana 30 35 44 JK Jeep Front, Ford 10.25/10.50 AMC 20 Rear Pinion Nut
$2.45
- SKU: 44189
- Brand: Dana/Spicer
- Weight: .30
- Shipping: Calculated at checkout
Weight | .30 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 30 35 44 JK Jeep Front, Ford 10.25/10.50 AMC 20 Rear Pinion Nut”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F250 | 1985 - 1986 |
Ford | F250 | 1987 - 1988 |
Ford | F250 | 1989 - 1990 |
Ford | F250 | 1991 - 1992 |
Ford | F250 | 1993 - 1994 |
Ford | F250 | 1995 - 1996 |
Ford | F250 | 1997 - 1998 |
Ford | F250 | 1999 - 2000 |
Ford | F250 | 2001 - 2002 |
Ford | F250 | 2003 - 2004 |
Ford | F250 | 2005 - 2006 |
Ford | F250 | 2007 - 2008 |
Ford | F250 | 2009 |
Ford | F350 | 1985 - 1986 |
Ford | F350 | 1987 - 1988 |
Ford | F350 | 1989 - 1990 |
Ford | F350 | 1991 - 1992 |
Ford | F350 | 1993 - 1994 |
Ford | F350 | 1995 - 1996 |
Ford | F350 | 1997 - 1998 |
Ford | F350 | 1999 - 2000 |
Ford | F350 | 2001 - 2002 |
Ford | F350 | 2003 - 2004 |
Ford | F350 | 2005 - 2006 |
Ford | F350 | 2007 - 2008 |
Ford | F350 | 2009 |
Jeep | AMC20 | 1975 - 1976 |
Jeep | AMC20 | 1977 - 1978 |
Jeep | AMC20 | 1979 - 1980 |
Jeep | AMC20 | 1981 - 1982 |
Jeep | AMC20 | 1983 - 1984 |
Jeep | CJ5 | 1975 - 1976 |
Jeep | CJ5 | 1977 - 1978 |
Jeep | CJ5 | 1979 - 1980 |
Jeep | CJ5 | 1981 - 1982 |
Jeep | CJ5 | 1983 - 1984 |
Jeep | CJ7 | 1975 - 1976 |
Jeep | CJ7 | 1977 - 1978 |
Jeep | CJ7 | 1979 - 1980 |
Jeep | CJ7 | 1981 - 1982 |
Jeep | CJ7 | 1983 - 1984 |
Related products
Small Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsSmall Parts & Seals
2003+ Dodge Ram 3500 Dual Dually Rear Wheel Hub Seal 11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 1 ton trucks with either the 11.5 rear axle and dual rear wheels. This part number is actually on the seal itself. The National seal part number is 710563.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 and newer GM trucks and 2003 and newer Dodge trucks with either the 10.5 or 11.5 rear end. This is for the yoke with the factory wear sleeve on it
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 to 2014 GM trucks and SUV’s with 8.6 rear end with the 10 bolt cover. This is for the yoke with the factory wear sleeve on it.
View Details
Reviews
There are no reviews yet.