This is a master king pin kit for the Dana 60 front ends from the early 1970’s to the mid 1990’s. These fit most domestic applicarions. Included parts are as follows: 2 706395X (lower kit) 2 620132 (Upper 4 bolt cap) 2 37307 (upper 4 bolt gasket) 2 620180 (upper spring seat) 2 41886 (upper nylon bushing) 2 37300 (upper spring) 2 37302 (upper srew in pin).
Dana 60 Master King Pin Kit Upper Lower Both Sides GM Chevy Ford Dodge 4X4 Front Axle
$195.00
- SKU: 706395
- Brand: Dana/Spicer
- Weight: 8.0
- Shipping: Calculated at checkout
Out of stock
Weight | 8.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 Master King Pin Kit Upper Lower Both Sides GM Chevy Ford Dodge 4X4 Front Axle”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | W350 | 1973 - 1974 |
Dodge Ram | W350 | 1975 - 1976 |
Dodge Ram | W350 | 1977 - 1978 |
Dodge Ram | W350 | 1979 - 1980 |
Dodge Ram | W350 | 1981 - 1982 |
Dodge Ram | W350 | 1983 - 1984 |
Dodge Ram | W350 | 1985 - 1986 |
Dodge Ram | W350 | 1987 - 1988 |
Dodge Ram | W350 | 1989 - 1990 |
Dodge Ram | W350 | 1991 - 1992 |
Dodge Ram | W350 | 1993 |
GM/Chevy | K30 | 1973 - 1974 |
GM/Chevy | K30 | 1975 - 1976 |
GM/Chevy | K30 | 1977 - 1978 |
GM/Chevy | K30 | 1979 - 1980 |
GM/Chevy | K30 | 1981 - 1982 |
GM/Chevy | K30 | 1983 - 1984 |
GM/Chevy | K30 | 1985 - 1986 |
GM/Chevy | K30 | 1987 - 1988 |
GM/Chevy | K30 | 1989 - 1990 |
GM/Chevy | K30 | 1991 |
Related products
Spindles
1977-1991 GM Chevy Dana 44 4X4 Axle Front Spindle Corporate 10 Bolt Blazer Suburban K10 K20
This is a genuine Dana Spicer spindle for the Dana 44 or corporate 10 bolt 4X4 front axle in 1/2 and 3/4 ton trucks, Blazers, and Suburbans from 1977-1991. This also comes with the dust seals, inner bearing, and plastic thrust washer.
View DetailsMiscellaneous
Dana 44 Corporate 10 Bolt 4X4 Front Axle Spindle Bolts Studs Steering Knuckle GM Ford Dodge Jeep
This is a genuine Dana/Spicer stud for the steering knuckle to the spindle.This fits Dana 44 and GM corporate 4X4 front axles. These are 3/8″-24 fine thread and the head of the stud is D shaped in order to clear the axle.
View DetailsThis is a spring seat that goes over the spring and bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the early 1990’s.
View DetailsThis is a genuine Dana/Spicer spindle that fits Ford F150 and Bronco 4X4 front applications from 1980-1992. This is for the Dana 44 front axle.
View DetailsMiscellaneous
This is a genuine Dana/Spicer spindle bearing and seal kit for the Dana 30 or 44 4X4 front axle found in many common domestic applications, including 1973-1992 1/2 ton GM trucks, 1976-1976 Jeep vehicles, and Dodge and Ford open knuckle front ends. This kit includes the support bearing, large and small V seals, and the [...]
View DetailsThis is a genuine Dana/Spicer 4X4 front spindle that fits 1977-1991 GM K30 1 ton trucks and 1975-1998 Dodge Ram 2500 and 3500 series trucks with the Dana 60 front axle. This is the same as part number 700013, but is much cheaper. This comes with the inner bearing, 2 dust seals, and the axle [...]
View DetailsThis is a genuine Dana/Spicer 4X4 front spindle that fit’s the following Ford applications: DANA 44 SPINDLE WITH 5 HOLES. FITS MOST FORD 1977 1/2-1979 F250 . DOES NOT FIT 76-77 LARGE EXTERNAL HUB. BEARING JOURNALS – 2.5″ OUTER & 1.625″ INNER. FLANGE DIA- 6.12″ INNER BRG DIA 2.0” // LENGTH 6.25”
View DetailsThis is a 4 bolt cap that goes over the spring and bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the early 1990’s.
View Details
Reviews
There are no reviews yet.