This is a complete set of aftermarket spindle nuts and washers for a Dana 60 front axle. It consists of 2 each inner nut with pin, locking washer, and outer nut with the pin. These were commonly found on GM, Ford, and Dodge applications. They were also used on Dana 50 applications in Ford applications. They are 2″ 16 threads per inch. This kit is also the same as Warn 33271 nut kit used to put lockouts on a Ford truck with factory automatic hubs.
Dana 60 Spindle Nut Kit Chevy Ford GMC Dodge Dana 50 Ford 4 Nuts 2 Washer 4X4
$40.00
- SKU: 33271
- Brand: RAJ International Trading
- Weight: .90
- Shipping: Calculated at checkout
Weight | .90 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 Spindle Nut Kit Chevy Ford GMC Dodge Dana 50 Ford 4 Nuts 2 Washer 4X4”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F350 | 1973 - 1974 |
Ford | F350 | 1975 - 1976 |
Ford | F350 | 1977 - 1978 |
Ford | F350 | 1979 - 1980 |
Ford | F350 | 1981 - 1982 |
Ford | F350 | 1983 - 1984 |
Ford | F350 | 1985 - 1986 |
Ford | F350 | 1987 - 1988 |
Ford | F350 | 1989 - 1990 |
Ford | F350 | 1991 - 1992 |
Ford | F350 | 1993 - 1994 |
Ford | F350 | 1995 - 1996 |
Ford | F350 | 1997 - 1998 |
GM/Chevy | K30 | 1970 - 1971 |
GM/Chevy | K30 | 1972 - 1973 |
GM/Chevy | K30 | 1974 - 1975 |
GM/Chevy | K30 | 1976 - 1977 |
GM/Chevy | K30 | 1978 - 1979 |
GM/Chevy | K30 | 1980 - 1981 |
GM/Chevy | K30 | 1982 - 1983 |
GM/Chevy | K30 | 1984 - 1985 |
GM/Chevy | K30 | 1986 - 1987 |
GM/Chevy | K30 | 1988 - 1989 |
GM/Chevy | K30 | 1990 - 1991 |
Related products
THIS IS A GENUINE DANA 44 SPINDLE WITH 5 HOLES FOR LARGE BEARING 1/2 TON DISC BRAKES APPLICATIONS. FITS MOST FORD 1976-1979 F150/F100 SERIES PICK UPS & SERVICE 1976-1978 BRONCO. THIS SPINDLE COMES WITH THE INNER BEARING, DUST SEALS, AND PLASTIC THRUST WASHER.
View DetailsThis is a genuine Dana Spicer spindle for the Dana 44 4X4 front axle in 1/2 and 3/4 ton trucks, Blazers, and Suburbans from 1973-1976. This is the same as part number 706528X, but it is much cheaper. This also comes with the dust seals, inner bearing, and plastic thrust washer.
View DetailsSmall Parts & Seals
DANA 44 SPINDLE BEARING & SEAL KIT BRONCO F150 1993-1996 FORD 4X4 FRONT AXLE
Dana 44 IFS BRONCO AND F150 1993-1996 Spindle Bearing and Seal Kit Includes 1 each Spindle Bearing (550759 or SCE2110) and V Seal, Wiper Seal (50492), and Thrust Washer (45651) as pictured.
View DetailsThis is a genuine Dana/Spicer spindle nut kit for most Dana 44 4X4 front axles in domestic trucks. This kit includes 1 inner nut with pin (21588X), 1 outer nut w/o pin (31139) and 1 washer with locking tab and holes (36569). This kit is for one side, so 2 kits are required per truck. [...]
View DetailsSpindles
1977-1991 GM Chevy Dana 44 4X4 Axle Front Spindle Corporate 10 Bolt Blazer Suburban K10 K20
This is a genuine Dana Spicer spindle for the Dana 44 or corporate 10 bolt 4X4 front axle in 1/2 and 3/4 ton trucks, Blazers, and Suburbans from 1977-1991. This also comes with the dust seals, inner bearing, and plastic thrust washer.
View DetailsThis is a 4 bolt cap that goes over the spring and bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the early 1990’s.
View DetailsMiscellaneous
SPINDLE NUT ONE PIECE FORD DANA 44 IFS F150 F250 GM DODGE JEEP IHC RATCHETING HIGH SHEAR
New OEM One Piece Ratcheting Spindle Nut Used on 1980’s-1990’s Ford F150 and F250 IFS Dana 44 front axles. Will work in Chevy Dana 44 and corporate 10 Bolt Axles As well as Dodge Jeep and IHC Dana 30 and Dana 44 Front Spindles. Can be used to replace the 3 piece style of spindle nut kits. This [...]
View DetailsThis is a genuine Dana/Spicer 4X4 front spindle for Ford F350 trucks from 1978-1997 with the Dana 60 front axle. This kit includes the inner spindle bearing, thrust washer, and 2 rubber seals for the back side of the spindle.
View Details
Reviews
There are no reviews yet.