This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right hand thread. Also this nut requires a 2 9/16″ special hub socket to remove and install it. This part number has been discontinued from Dana.
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
$24.00
- SKU: 47163
- Brand: Dana/Spicer
- Weight: 1.0
- Shipping: Calculated at checkout
Weight | 1.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1980 - 1981 |
Dodge Ram | 2500 | 1982 - 1983 |
Dodge Ram | 2500 | 1984 - 1985 |
Dodge Ram | 2500 | 1986 - 1987 |
Dodge Ram | 2500 | 1988 - 1989 |
Dodge Ram | 2500 | 1990 - 1991 |
Dodge Ram | 2500 | 1992 - 1993 |
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 |
Dodge Ram | 3500 | 1980 - 1981 |
Dodge Ram | 3500 | 1982 - 1983 |
Dodge Ram | 3500 | 1984 - 1985 |
Dodge Ram | 3500 | 1986 - 1987 |
Dodge Ram | 3500 | 1988 - 1989 |
Dodge Ram | 3500 | 1990 - 1991 |
Dodge Ram | 3500 | 1992 - 1993 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 |
Ford | F350 | 1992 - 1993 |
Ford | F350 | 1994 - 1995 |
Ford | F350 | 1996 - 1997 |
Ford | F350 | 1998 - 1999 |
Ford | F350 | 2000 - 2001 |
Ford | F350 | 2002 - 2003 |
Ford | F350 | 2004 - 2005 |
Ford | F350 | 2006 - 2007 |
Ford | F350 | 2008 - 2009 |
Ford | F350 | 2010 |
Related products
Miscellaneous
This is a genuine Dana tone ring for a Dana 80 rear differential. This works on both Ford and Dodge applications.
View DetailsThis is a genuine AAM rear hub nut for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is the 9 pin nut as opposed to the earlier 6 pin design. This nut uses a retainer (40096297) that snaps onto the nut to hold the key (40082234) in [...]
View DetailsThis is a genuine Dana tone ring for a Dana 70 rear differential. This works on both Ford and Dodge applications
View DetailsThis is a genuine AAM ring gear bolt for the 11.5 rear differential found in 1999 and newer GM 3/4 and 1 ton trucks as well as 2003 and newer Dodge Ram 2500 and 3500 series trucks. 12 required per vehicle. These are right hand thread. The new AAM part number is 40022812.
View DetailsThis is a genuine Dana wedge shaped key that drives into the nylon part of the lock nut on a Dana 70 or 80 full floating rear axle found in Dodge, Ford, and GM trucks.
View DetailsThis is a genuine AAM rear hub nut retainer for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is for the 9 pin nut as opposed to the earlier 6 pin design. This retainer snaps onto the nut (40091019) to hold the key (40082234) in place under [...]
View DetailsMiscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View DetailsMiscellaneous
Ford Dana 80 & 10.25 10.5 Rear Axle Ratchet Hub Nut Ratcheting Spindle 2″ Right RH Thread
This is a genuine Dana ratchet style hub nut used on the Ford Dana 80 or 10.25 and 10.5 rear full floating axles. This one has right hand threads.
View Details
Reviews
There are no reviews yet.