This is a genuine AAM axle slinger. This goes on the outer stub axle where it butts up to the back of the wheel bearing hub assembly. This fits 2003+ Dodge Ram 2500 and 3500 series 4X4 trucks with the 9.25 American Axle Manufacturing front axle. We have also used these on Dana 60 Dodge stub axles.
Dodge Ram 2500 3500 Outer Stub Axle Slinger 9.25 AAM 4X4 Front Dust Shield 2003+
$5.00
- SKU: 40011848
- Brand: Dana/Spicer
- Weight: .50
- Shipping: Calculated at checkout
Weight | .50 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dodge Ram 2500 3500 Outer Stub Axle Slinger 9.25 AAM 4X4 Front Dust Shield 2003+”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 - 2003 |
Dodge Ram | 2500 | 2004 - 2005 |
Dodge Ram | 2500 | 2006 - 2007 |
Dodge Ram | 2500 | 2008 - 2009 |
Dodge Ram | 2500 | 2010 - 2011 |
Dodge Ram | 2500 | 2012 - 2013 |
Dodge Ram | 2500 | 2014 - 2015 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 - 2003 |
Dodge Ram | 3500 | 2004 - 2005 |
Dodge Ram | 3500 | 2006 - 2007 |
Dodge Ram | 3500 | 2008 - 2009 |
Dodge Ram | 3500 | 2010 - 2011 |
Dodge Ram | 3500 | 2012 - 2013 |
Dodge Ram | 3500 | 2014 - 2015 |
Related products
Small Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
This is a genuine Dana pinion nut that fits all Dana 80 rear differentials. This nut uses an 1 7/8″ socket to remove and install it. Some yokes require a very thin wall socket. The newest Dana part number for this yoke is 2001855.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 1998.5-2005 Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 1998.5-2005 Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked FRESHEDA 5H-15052 A085824 RDS 81. This seal measures approx. 4.46″ outside diameter
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsSmall Parts & Seals
This is a genuine AAM crush sleeve for the 11.5 rear differential found in GM and Dodge 3/4 & 1 ton trucks.
View DetailsSmall Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View Details
Reviews
There are no reviews yet.