This is a genuine AAM rear axle flange gasket for 2011 and newer GM trucks with the 11.5 rear axle.
GM 11.5 Rear Axle Flange Gasket Hub 2011+ AAM Chevy
$3.75
- SKU: 40051851
- Brand: AAM American Axle Manufacturing
- Weight: .25
- Shipping: Calculated at checkout
Weight | .25 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “GM 11.5 Rear Axle Flange Gasket Hub 2011+ AAM Chevy”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | 2500 | 2011 - 2012 |
GM/Chevy | 2500 | 2013 - 2014 |
GM/Chevy | 2500 | 2015 - 2016 |
GM/Chevy | 2500 | 2017 |
GM/Chevy | 3500 | 2011 - 2012 |
GM/Chevy | 3500 | 2013 - 2014 |
GM/Chevy | 3500 | 2015 - 2016 |
GM/Chevy | 3500 | 2017 |
Related products
Miscellaneous
This is a genuine AAM front differential locking ring for the GM 8.25IFS differential found in 2007 and newer 1/2 ton trucks and SUVs. There are 2 of these required per truck. The original AAM part number was 40032881.
View DetailsThis is a genuine AAM ring gear bolt for the 11.5 rear differential found in 1999 and newer GM 3/4 and 1 ton trucks as well as 2003 and newer Dodge Ram 2500 and 3500 series trucks. 12 required per vehicle. These are right hand thread. The new AAM part number is 40022812.
View DetailsMiscellaneous
Dana 70 80 Rear Hub Nut Nylon Lock 2″ 16 TPI 2 9/16″ Socket Full Float Dodge, Ford, GM
This is an aftermarket rear hub nut for use on Dana 70 and 80 rear axles with 2″ 16 threads per inch. This is the style that uses a wedge key that drives in a keyway on the top of the spindle and cuts through the nylon part of this nut. This nut is right [...]
View DetailsMiscellaneous
This is a genuine Dana tone ring for a Dana 60 rear differential. This works on both Ford and Dodge applications.
View DetailsMiscellaneous
This is a genuine AAM lock key for the GM and Dodge trucks with the 10.5/11.5 full floating rear differentials. This is to be used with the round 6 or 9 pin nuts that are keyed on the inside. We also have the nuts and retainers available.
View DetailsMiscellaneous
This is a genuine AAM pinion flange yoke for the 10.5 and 11.5 14 bolt rear differential found in 2003+ Dodge 3/4 and 1 ton trucks. This is used with the 26064030 pinion seal. It already has the wear sleeve on the seal surface. This replaces the perfectly square ones found on some early models [...]
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsThis is a genuine AAM rear hub nut retainer for the later model GM or Dodge trucks with either the 10.5 or 11.5 rear differential. This is for the 9 pin nut as opposed to the earlier 6 pin design. This retainer snaps onto the nut (40091019) to hold the key (40082234) in place under [...]
View Details
Reviews
There are no reviews yet.