This is a genuine Dana/Spicer rear hub nut. This is for the 2 1/8″ diameter rear spindle. This is the ratcheting nut. These were all righ handed thread. These are larger than the common 2″ diameter nut found on most 1 ton Fords. As always if you are unsure of the size that you need for your truck feel free to email us with the tag number on your differential and we will make sure.
SPICER REAR AXLE BEARING LOCK NUT 46471 FORD CHEVY DANA 80 FREIGHTLINER RATCHET 2 1/8″
$22.00
- SKU: 46471
- Brand: Dana/Spicer
- Weight: 1.0
- Shipping: Calculated at checkout
Weight | 1.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “SPICER REAR AXLE BEARING LOCK NUT 46471 FORD CHEVY DANA 80 FREIGHTLINER RATCHET 2 1/8″”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F450 | 1994 - 1995 |
Ford | F450 | 1996 - 1997 |
Ford | F450 | 1998 - 1999 |
Ford | F450 | 2000 - 2001 |
Ford | F450 | 2002 - 2003 |
Ford | F450 | 2004 |
Ford | F550 | 1994 - 1995 |
Ford | F550 | 1996 - 1997 |
Ford | F550 | 1998 - 1999 |
Ford | F550 | 2000 - 2001 |
Ford | F550 | 2002 - 2003 |
Ford | F550 | 2004 |
Related products
This is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 to 2014 GM trucks and SUV’s with 8.6 rear end with the 10 bolt cover. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
Dodge Dana 44 & 60 Front Outer Stub Axle Castle Nut Also AAM 9.25 Spindle 4X4
This genuine Dana axle nut fits all Dodge front axles including Dana 44 & 60 and the AAM 9.25 found in 2003+ trucks. This is a castle nut. We also have the washer available. This is the same part as AAM 40010627.
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View Details
Reviews
There are no reviews yet.