This is a front axle disconnect kit for the oil pan mounted axle on 2002-2009 GM SUV’s with the 7.25 front axle. This kit has all the necessary parts for the axle housing on the passenger side of the oil pan.
Trailblazer AAM GM 7.25 IFS Oil Pan Mounted Disconnect Housing Kit AWD 2002-2009 Chevy
$225.00
- SKU: 74080001
- Brand: Dana/Spicer
- Weight: 8.0
- Shipping: Calculated at checkout
Weight | 8.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Trailblazer AAM GM 7.25 IFS Oil Pan Mounted Disconnect Housing Kit AWD 2002-2009 Chevy”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | Envoy | 2002 - 2003 |
GM/Chevy | Envoy | 2004 - 2005 |
GM/Chevy | Envoy | 2006 - 2007 |
GM/Chevy | Envoy | 2008 - 2009 |
GM/Chevy | Trailblazer | 2002 - 2003 |
GM/Chevy | Trailblazer | 2004 - 2005 |
GM/Chevy | Trailblazer | 2006 - 2007 |
GM/Chevy | Trailblazer | 2008 - 2009 |
Related products
Small Parts & Seals
Ford Straight Front Axle Tube Dust Seal 1998.5-2005 Dana 50 & 60
This genuine Dana axle tube dust seal fits 1998.5-2005 Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FORSHEDA 11 10.060 D768-11 50381.These are approx. 3.125″ outside diameter, which is smaller than the later ones. This seal goes on the axle itself right behind the u-joint at the end [...]
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
This genuine Dana pinion nut washer that fits all Dana 80 rear ends. This goes with the 37082 nut.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
This is a genuine rear wheel hub seal for 2011 and newer GM 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single or dual rear wheels. This part number is actually on the seal itself.
View Details
Reviews
There are no reviews yet.