This is a genuine Dana gearset for a Dodge or Chevy Dana 80 with 4:10 gear ratio. This kit includes 42464 pinion, 42465 ring gear, 701088-1X ring gear bolts, 707064X outer pinion bearing and race, 707065X inner pinion bearing and race, 701092X pinion seal and slinger, and 702004 master shim kit. The only bearings not included are the differential side bearings. They are also available on our website as 706070X. Must be used on a 4:10 and down carrier (4:30, 4:63, 4:88, etc.).
Dana 80 Dodge Chevy 4:10 Ring Gear & Pinion Kit w/Shims Pinion Bearings
$625.00
- SKU: 708026-2
- Brand: Dana/Spicer
- Weight: 44.0
- Shipping: Calculated at checkout
2 in stock
Weight | 44.0 lbs |
---|---|
Dimensions | 12 × 12 × 12 in |
Be the first to review “Dana 80 Dodge Chevy 4:10 Ring Gear & Pinion Kit w/Shims Pinion Bearings”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 |
Related products
Ring & Pinion Sets
GM 9.25IFS 3:73 Ring and Pinion Front 1988+ Chevrolet 3/4 & 1 Ton
This is a genuine AAM gearset for the 9.25IFS differential found in the front of 1988 and newer GM 3/4 and 1 ton trucks. Tooth count are 11 on the pinion and 41 on the ring gear. This gearset is “Made in U.S.A.”
View DetailsRing & Pinion Sets
C9.25-410R Dodge Ram 2500 3500 AAM Front Ring & Pinion 2003-2012 Straight Axle 4X4
This is a genuine AAM ring and pinion in a 4:10 ratio for the American Axle front differential in 2007-2012 4X4 Dodge Ram 2500 and 3500 series trucks. According to AAM there is a 3mm or 0.118 difference in deck height on the carrier as opposed to earlier models. They recommend using the 2007 and [...]
View DetailsRing & Pinion Sets
GM7.5-323 OEM AAM Ring & Pinion 10 Bolt Gear Set 7.5/7.6 Chevy S10 Camaro
This is a genuine AAM ring and pinion set in a 3:23 ratio that fits all GM 7.5 or 7.6 10 bolt differentials from 1977 and up. This includes S10’s Malibu’s Camaro’s , etc. In our opinion these are the best gearsets available on the market today. They tooth counts are 13 on the pinion [...]
View DetailsRing & Pinion Sets
GM10-342 OEM AAM Ring & Pinion 10 Bolt Gear Set 8.5/8.6 Chevy Car and Truck
This is a genuine AAM ring and pinion set in a 3:42 ratio that fits all GM 8.5 or 8.6 10 bolt differentials from 1973 and up. This includes early Camaros, 1/2 ton pickups and SUVs, Caprice, etc. In our opinion these are the best gearsets available on the market today. They tooth counts are [...]
View DetailsRing & Pinion Sets
Genuine AAM Ford 8.8 3:55 Gear Set Ring & Pinion Mustang F150 Crown Victoria Explorer
This is a genuine AAM gearset in a 3:55 ratio for Ford 8.8 rear differentials. We believe these are some of the highest quality gears available.
View DetailsRing & Pinion Sets
This is a genuine Dana ring and pinion set for the front of a Ford truck with Dana 60 3:54 reverse cut. This kit includes all necessary shims, ring gear bolts, pinion nut and washer, and both inner and outer pinion bearings and races.
View DetailsRing & Pinion Sets
This is a genuine Dana 60 7:17 ring and pinion set for the front or rear in a GM or Dodge application, or the rear of a Ford truck. This is a bare gearset only with no bearings, bolts, or shims. This is the same gear set that is found in the 706033-8X kit.
View DetailsRing & Pinion Sets
C9.25-342R Dodge Ram 2500 3500 AAM Front Ring & Pinion 2007-2013 Straight Axle 4X4 3:42 9.25
This is a genuine AAM ring and pinion in a 3:42 ratio for the American Axle front differential in 2007 and newer 4X4 Dodge Ram 2500 and 3500 series trucks. According to AAM there is a 3mm or 0.118 difference in deck height on the carrier as opposed to earlier models. They recomend using the [...]
View Details
Reviews
There are no reviews yet.