This is a genuine Dana ring and pinion kit in a 3:73 ratio. This gearset fits 4:10 and down carriers. This kit includes a 50546 pinion, 50547 ring gear, 701088-1X ring gear bolt kit, 707447X inner pinion bearing and race, 707064X outer pinion bearing and race, 703008 pinion seal and slinger kit, and 701168X shim kit. The only bearing it does not come with are the differential side bearings which are also available on our website as 706070X. This kit can also be used to regear a Dodge Dana 80 from 4:10 to 3:73 without changing the carrier. Only the inner pinion bearing is different. If ordering for a Dodge just put a note in with your order and we will change out the inner pinion bearing.
Dana 80 Ford 3:73 Ring Gear & Pinion Kit Set Thin fits 4:10 and Down Differential Carrier
$595.00
- SKU: 708120-5
- Brand: Dana/Spicer
- Weight: 44.0
- Shipping: Calculated at checkout
1 in stock
Weight | 44.0 lbs |
---|---|
Dimensions | 15 × 15 × 14 in |
Be the first to review “Dana 80 Ford 3:73 Ring Gear & Pinion Kit Set Thin fits 4:10 and Down Differential Carrier”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F350 | 1997 - 1998 |
Ford | F350 | 1999 - 2000 |
Ford | F350 | 2001 - 2002 |
Ford | F350 | 2003 - 2004 |
Ford | F350 | 2005 - 2006 |
Ford | F350 | 2007 - 2008 |
Ford | F350 | 2009 - 2010 |
Ford | F350 | 2011 - 2012 |
Ford | F350 | 2013 - 2014 |
Ford | F450 | 1997 - 1998 |
Ford | F450 | 1999 - 2000 |
Ford | F450 | 2001 - 2002 |
Ford | F450 | 2003 - 2004 |
Ford | F450 | 2005 - 2006 |
Ford | F450 | 2007 - 2008 |
Ford | F450 | 2009 - 2010 |
Ford | F450 | 2011 - 2012 |
Ford | F450 | 2013 - 2014 |
Related products
Ring & Pinion Sets
C9.25-342R Dodge Ram 2500 3500 AAM Front Ring & Pinion 2007-2013 Straight Axle 4X4 3:42 9.25
This is a genuine AAM ring and pinion in a 3:42 ratio for the American Axle front differential in 2007 and newer 4X4 Dodge Ram 2500 and 3500 series trucks. According to AAM there is a 3mm or 0.118 difference in deck height on the carrier as opposed to earlier models. They recomend using the [...]
View DetailsRing & Pinion Sets
Genuine AAM Ford 8.8 3:73 Gear Set Ring & Pinion Mustang F150 Crown Victoria Explorer
This is a genuine AAM gearset in a 3:73 ratio for Ford 8.8 rear differentials. These are made by American Axle & Manufacturing, which is an OEM supplier to Ford. Location of manufacture does vary, but all are made in an AAM facility. We believe these are some of the highest quality gears available.
View DetailsRing & Pinion Sets
GM7.5-323 OEM AAM Ring & Pinion 10 Bolt Gear Set 7.5/7.6 Chevy S10 Camaro
This is a genuine AAM ring and pinion set in a 3:23 ratio that fits all GM 7.5 or 7.6 10 bolt differentials from 1977 and up. This includes S10’s Malibu’s Camaro’s , etc. In our opinion these are the best gearsets available on the market today. They tooth counts are 13 on the pinion [...]
View DetailsRing & Pinion Sets
Genuine AAM Dodge Chrysler 9.25 3:92 Gear Set Ring & Pinion C9.25-392
This is a genuine AAM ring and pinion in a 3:92 ratio for the Dodge and Chrysler vehicles with the 9.25 12 bolt rear differential. These fit 1/2 trucks and vans up to 2010 when Dodge started using the ZF rear differentials.
View DetailsThis is a genuine AAM ring and pinion set in a 4:10 ratio that fits all GM 8.0 rear differentials from 2002 and up. This includes Trailblazer’s and Envoy’s. In our opinion these are the best gearsets available on the market today. They tooth counts are 10 on the pinion and 41 on the ring [...]
View DetailsRing & Pinion Sets
C9.25-373R Dodge Ram 2500 3500 AAM Front Ring & Pinion 2007-2013 Straight Axle 4X4
This is a genuine AAM ring and pinion in a 3:73 ratio for the American Axle front differential in 2007 and newer 4X4 Dodge Ram 2500 and 3500 series trucks. According to AAM there is a 3mm or 0.118 difference in deck height on the carrier as opposed to earlier models. They recomend using the [...]
View DetailsRing & Pinion Sets
GM10-410 OEM AAM Ring & Pinion 10 Bolt Gear Set 8.5/8.6 Chevy Car and Truck
This is a genuine AAM ring and pinion set in a 4:10 ratio that fits all GM 8.5 or 8.6 10 bolt differentials from 1973 and up. This includes early Camaros, 1/2 ton pickups and SUVs, Caprice, etc. In our opinion these are the best gearsets available on the market today. They tooth counts are [...]
View DetailsRing & Pinion Sets
This is a genuine Dana 60 7:17 ring and pinion set for the front or rear in a GM or Dodge application, or the rear of a Ford truck. This is a bare gearset only with no bearings, bolts, or shims. This is the same gear set that is found in the 706033-8X kit.
View Details
Reviews
There are no reviews yet.