This is a booted rear seal that fits 241DHD Dodge transfer cases, NV4500 and NV5600 2wd Dodge diesel transmissions as well as GM 261 and 263 XHD transfer cases.
261 263 XHD Booted Rear Seal Transfer Case GM Dodge NV4500 NV5600 241DHD Chevy 261XHD 263XHD
$5.75
- SKU: 4741
- Brand: New Venture
- Weight: .25
- Shipping: Calculated at checkout
Weight | .25 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “261 263 XHD Booted Rear Seal Transfer Case GM Dodge NV4500 NV5600 241DHD Chevy 261XHD 263XHD”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 - 2003 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 - 2003 |
GM/Chevy | 2500 | 1999 - 2000 |
GM/Chevy | 2500 | 2001 - 2002 |
GM/Chevy | 2500 | 2003 - 2004 |
GM/Chevy | 2500 | 2005 - 2006 |
GM/Chevy | 2500 | 2007 |
GM/Chevy | 3500 | 1999 - 2000 |
GM/Chevy | 3500 | 2001 - 2002 |
GM/Chevy | 3500 | 2003 - 2004 |
GM/Chevy | 3500 | 2005 - 2006 |
GM/Chevy | 3500 | 2007 |
Related products
Small Parts & Seals
This is a genuine Dana 80 pinion yoke for the 1410 series u-joint. This fits all Dana 80’s including Chevy, Ford, and Dodge. Some applications may require removal of tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is the outer axle nut washer that goes with the 46085 axle nut on 4X4 Dodge front axles, this fits Dana 44 and 60 as well as the AAM 9.25 front axle found in 2003 and newer Dodge Ram 2500 and 3500 series trucks.
View DetailsSmall Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsSmall Parts & Seals
This is a Dana 80 pinion yoke that mostly shows to fit Ford applications with the 1480 series u-joints. May have to remove the tin dust shield for seal clearance.
View DetailsSmall Parts & Seals
This is a genuine AAM rear pinion seal that fits 1998 to 2014 GM trucks and SUV’s with 8.6 rear end with the 10 bolt cover. This is for the yoke with the factory wear sleeve on it.
View DetailsSmall Parts & Seals
Ford Straight 4X4 Front Axle Tube Dust Seal 2006+ Dana 50 & 60 F250 F350
This genuine Dana axle tube dust seal fits 2006 and newer Ford F250 and F350 dana 50 and 60 straight front axles. This seal is marked FES 5M-15197 and 53877. These are approx. 3.450″ outside diameter, which is larger than the earlier ones. This seal goes on the axle itself right behind the u-joint at [...]
View DetailsSmall Parts & Seals
GM 7.5/7.6 Rear Axle C-Clip S10 Camaro Chevrolet 10 Bolt 7 1/2″
This is a genuine AAM c-clip for the GM 7.5/7.6 rear axle found in S10’s, Malibu’s, Camaro’s etc. These are copper colored steel. These are for both open and limited slip style carriers. 2 required per vehicle.
View DetailsThis is a genuine AAM rear hub snap ring that holds the outer bearing in the hub on a full floating 2011 or newer GM 10.5 or 11.5 rear axle. This snap ring measures 3 7/8″ O.D.
View Details
Reviews
There are no reviews yet.