This is a genuine Dana/Spicer seal for the enclosed knuckle type axles found in early model (1960’S) GM, Dodge, Ford, and International trucks with the Dana 60 or larger knuckle 44 4X4 front axle. These are the larger 8″ diameter seals and they go with the 33663 retainers.
Dana Spicer Axle Oil Seal Enclosed 4X4 Knuckle 44 Front Ford Dodge GM International
$10.40
- SKU: 35261
- Brand: Dana/Spicer
- Weight: 1
- Shipping: Calculated at checkout
Out of stock
Weight | 1 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana Spicer Axle Oil Seal Enclosed 4X4 Knuckle 44 Front Ford Dodge GM International”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
GM/Chevy | K10 | 1960 - 1961 |
GM/Chevy | K10 | 1962 - 1963 |
GM/Chevy | K10 | 1964 - 1965 |
GM/Chevy | K10 | 1966 - 1967 |
GM/Chevy | K10 | 1968 |
GM/Chevy | K20 | 1960 - 1961 |
GM/Chevy | K20 | 1962 - 1963 |
GM/Chevy | K20 | 1964 - 1965 |
GM/Chevy | K20 | 1966 - 1967 |
GM/Chevy | K20 | 1968 |
Jeep | CJ | 1960 - 1961 |
Jeep | CJ | 1962 - 1963 |
Jeep | CJ | 1964 - 1965 |
Jeep | CJ | 1966 - 1967 |
Jeep | CJ | 1968 |
Related products
Small Parts & Seals
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 3/4 and 1 ton trucks with either a 10.5 or 11.5 ring gear. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used [...]
View DetailsThis is a genuine AAM pinion nut that fits the 11.5 rear differential found in 3/4 and 1 ton GM & Dodge trucks. We also have the washer (40003255) available for this nut. This nut also fits the 10.5 Dodge rear differential. We use a 1 7/16″ 12 point socket on these, but it may [...]
View DetailsSmall Parts & Seals
GM 8.6 Pinion Yoke Sleeve Seal 1999+ Chevrolet 10 Bolt 1/2 Ton 3/4 GM9.5 14 Bolt Trucks & SUVs
This is a genuine AAM pinion yoke sleeve that fits 1999 and newer GM 1/2 ton trucks also some 1998 model Suburban and Tahoe. This sleeve goes on the yoke and the pinion seal seals against it. We have also found on some yokes you can simply remove this sleeve and used the earlier National [...]
View DetailsSmall Parts & Seals
GM 10 12 Bolt 8.5/8.6 Ford 8.8 Rear Axle C-Clip 8.875 Chevrolet Car Truck
This is a genuine AAM c-clip for the GM 8.5/8.6 10 bolt and 8.875 12 bolt also Ford 8.8 rear axles. These are copper colored steel c-clips. 2 required per vehicle.
View DetailsSmall Parts & Seals
Ford Straight Front Axle Steering Knuckle Seal 2006+ Dana 50 & 60
This is a genuine Dana front steering knuckle seal that fits 2006 and newer Ford F250 & F350 with either a Dana 50 or Dana 60 straight front axle. The seal is marked SKF 2017426 DANA. This seal measures approx. 5.48″ outside diameter. The original part number was 2017426.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsSmall Parts & Seals
2003+ Dodge Ram 2500/3500 Single Rear Wheel Hub Seal 10.5/11.5 AAM
This is a genuine rear wheel hub seal for 2003 and newer Dodge 3/4 and 1 ton trucks with either the 10.5 or 11.5 rear axle and single rear wheels. This part number is actually on the seal itself. The new AAM part number for this seal is 40156029, but we still use the original [...]
View DetailsSmall Parts & Seals
This is a genuine AAM pinion nut washer found on GM & Dodge 3/4 and 1 ton trucks. This is to be used with nut part number 40003027.
View Details
Reviews
There are no reviews yet.