This 29 spline coupler goes between a G360 Getrag 5 speed transmission and a 205 New Process transfer case in a Dodge Diesel truck. These can also be used for NV4500 conversions.
29 Spline Transfer Case Coupler Dodge G360 Getrag 205 NV4500
$60.00
- SKU: 4505302
- Brand: New Process
- Weight: 3.0
- Shipping: Calculated at checkout
Weight | 3.0 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “29 Spline Transfer Case Coupler Dodge G360 Getrag 205 NV4500”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1989 - 1990 |
Dodge Ram | 2500 | 1991 - 1992 |
Dodge Ram | 2500 | 1993 |
Dodge Ram | 3500 | 1989 - 1990 |
Dodge Ram | 3500 | 1991 - 1992 |
Dodge Ram | 3500 | 1993 |
Related products
Transfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View DetailsSmall Parts & Seals
271 & 273 Dodge Transfer Case Large Booted Rear Seal 271D 273D 2003+
This is the large booted seal for the rear of a 271 or 273 Dodge transfer case with a rear slip yoke. The New Venture part number is 38249. These are almost impossible to get at your local auto parts store. These are used with the 45379 rear bushing. This seal can also be used [...]
View DetailsTransfer Case Parts
This is the inner most ring for a 261 or 263 GM transfer case. It is part of a 3 piece synchronizer pack.
View DetailsTransfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View DetailsTransfer Case Parts
263 GM Transfer Case Range Slider Updated Wide Groove 263HD 263XHD
This range slider fits all versions of the 263 GM transfer case including 263XHD. This is the updated slider with the wide groove. To be used with the 41819 range fork.
View DetailsTransfer Case Parts
This is the hub that splines into the sprocket and synchronizer clutch and rides on the mainshaft of the transfer case on a 261 or 263 GM. This one is made to use the seperate synchronizer clutch. Be sure that yours is made like this as some were a 1 piece design with the synchronizer [...]
View DetailsTransfer Case Parts
This Morse chain fits all NP246 GM transfer cases and most 261LD GM tranfer cases. It is 1 1/4″ wide and has 49 links.
View DetailsTransfer Case Parts
This range fork fits all 271 Dodge transfer cases. The casting number is the same as the part number.
View Details
Reviews
There are no reviews yet.