This is a genuine Morse chain for the Borg Warner 4417 transfer case found in Ford Expedition and Lincoln Navigator’s. It is 1 1/4″ wide and 42 links
Borg Warner 4417 Transfer Case Chain Lincoln Navigator Ford Expedition
$120.00
- SKU: HV076
- Brand: Morse Chain
- Weight: 5.0
- Shipping: Calculated at checkout
Weight | 5.0 lbs |
---|---|
Dimensions | 12 × 4 × 2 in |
Be the first to review “Borg Warner 4417 Transfer Case Chain Lincoln Navigator Ford Expedition”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | Expedition | 2000 - 2001 |
Ford | Expedition | 2002 - 2003 |
Ford | Expedition | 2004 - 2005 |
Related products
Transfer Case Parts
GM NP261HD and NP263HD GM Transfer Case Chain Chevy 1999-2007
This Morse chain fits mots 261HD and 263HD GM transfer cases. It is 1 1/2″ wide and 49 links. Be sure to check your chain before ordering as I have seen the HV072 or HV074 chains in these units.
View DetailsTransfer Case Parts
263 GM Transfer Case Range Slider Updated Wide Groove 263HD 263XHD
This range slider fits all versions of the 263 GM transfer case including 263XHD. This is the updated slider with the wide groove. To be used with the 41819 range fork.
View DetailsTransfer Case Parts
29 Spline Input Shaft 241DHD/241DLD Transfer Case Dodge 241 Wide Bearing
This 29 spline input shaft fits all 241 Dodge transfer cases including 241DLD and 241DHD with the fine tooth planetaries (1995 and newer). It is set up for the wide (BD50-8 or N5210KLB) bearing. We also have a 29 spline input for 241DHD only with the narrow input bearing (110L or 6010N) if you prefer. [...]
View DetailsTransfer Case Parts
This transfer case sprocket is used in both Ford and Dodge 271 and 273 units. Both sprockets are the same in these units.
View DetailsTransfer Case Parts
This range slider fits all versions of the 231 241 and 261 transfer cases, except 241DHD with the PTO opening on the side of the transfer case. Including GM, Dodge, and Jeep.
View DetailsTransfer Case Parts
Aluminum range fork fits 231-241-242-261 New Process transfer cases Chevy Dodge Jeep
This aluminum range shift fork fits many transfer case applications including 231’s 241’s 242’s and 261,s. This parts number is cast on most factory forks and replaces the earlier fork cast 16976.
View DetailsTransfer Case Parts
10 spline coupler for early GM 205 transfer case to 4 speed standard transmission 4 1/4″ long.
10 spline female coupler for early HM 205 transfer cases used behind 4 speed manual transmission.
View DetailsTransfer Case Parts
1999-2007 Chevy 261 & 263 GM Transfer Case Middle Synchronizer Ring Fiber Lined Syncro Mode
This is the middle synchronizer ring for a 261 or 263 GM transfer case. It is 1 of 3 parts that make up the synchronizer pack.
View Details
Reviews
There are no reviews yet.