This updated mainshaft fits all NV4500 Dodge diesel 5 speed transmissions. This is the updated shaft with splines the full length of the 5th gear and a 2 piece drop washer that goes in a groove behind the 5th gear to isolate it from the nut. This mainshaft virtually eliminates the problem of the 5th gear nut backing off.
NV4500 Dodge Diesel 4X4 Updated Mainshaft w/drop washer 5 Speed Transmission
$140.00
- SKU: 27173L
- Brand: Pro Active
- Weight: 16.0
- Shipping: Calculated at checkout
Weight | 16.0 lbs |
---|---|
Dimensions | 24 × 4 × 4 in |
Be the first to review “NV4500 Dodge Diesel 4X4 Updated Mainshaft w/drop washer 5 Speed Transmission”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 - 2003 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 - 2003 |
Related products
Transmission Parts
1 3/8″ input shaft Dodge diesel and V10 NV4500 transmission 5 speed
This input shaft fits the NV4500 Dodge transmissions used behind the diesel or V10 gas engines. This is the larger 1 3/8″ clutch spline found on some aftermarket or factory 6 speed clutches.
View DetailsTransmission Parts
This first gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early (2001 & older) transmission you will have to use the updated lined synchronizer ring. There is a Dodge part number on the box for reference 05019907AA. This is an aftermarket part. We have used the same supplier for over [...]
View DetailsThis bearing and seal kit fits all NV5600 dodge transmissions and includes all the tapered bearing and races and seals. It does not include any of the caged needle bearings. They are available in a seperate needle bearing kit.
View DetailsThis bearing and seal kit fits all G56 Dodge diesel 6 speed manual transmissions. It includes all the tapered bearings and races and seals. It does not include any caged needle bearings for underneath the gears on the mainshaft.
View DetailsTransmission Parts
Stock replacement front bearing retainer Dodge diesel and V10 NV4500 transmission
This is a stock replacement front bearing retainer for the NV4500 transmissions found in the Dodge diesel or V10 gas trucks. Fits all years with stock inputs.
View DetailsTransmission Parts
This syncro ring kit fits Ford ZF 5 speeds 1996 and later S5-47. This set has 6 rings.
View DetailsTransmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View DetailsThis bearing and seal kit fits all Dodge NV4500 transmissions and GM NV4500 transmissions with the external slave cylinder up to 1995. This kit has all the seals, tapered bearings and races as well as the mainshaft pilot and thrust bearing and countershaft front plug. This kit does not include the caged needle bearings underneath [...]
View Details
Reviews
There are no reviews yet.