This is an updated 2wd mainshaft for a NV4500 Dodge Diesel or V10 gas transmission. This is the style that uses a drop washer kit to isolate the 5th gear from the nut to virtually eliminate the typical 5th gear nut problem.
Updated NV4500 Dodge 2wd Mainshaft Diesel 5 Speed Transmission
$175.00
- SKU: 27176L
- Brand: Pro Active
- Weight: 20.0
- Shipping: Calculated at checkout
1 in stock
Weight | 20.0 lbs |
---|---|
Dimensions | 30 × 4 × 4 in |
Be the first to review “Updated NV4500 Dodge 2wd Mainshaft Diesel 5 Speed Transmission”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Dodge Ram | 2500 | 1994 - 1995 |
Dodge Ram | 2500 | 1996 - 1997 |
Dodge Ram | 2500 | 1998 - 1999 |
Dodge Ram | 2500 | 2000 - 2001 |
Dodge Ram | 2500 | 2002 - 2003 |
Dodge Ram | 3500 | 1994 - 1995 |
Dodge Ram | 3500 | 1996 - 1997 |
Dodge Ram | 3500 | 1998 - 1999 |
Dodge Ram | 3500 | 2000 - 2001 |
Dodge Ram | 3500 | 2002 - 2003 |
Related products
Transmission Parts
NV4500 cluster assembly 1997 and newer GM and Dodge w/short idler.
This is a complete cluster gear assembly for the 1997 and newer NV4500 transmissions in GM and Dodge trucks with the short idler gear. Note the smallest set of teeth run all the way back to the rear bearing.
View DetailsTransmission Parts
Shifter Shift Boot G56 Dodge diesel 6 speed transmission Orange
This shifter boot fits the G56 6 speed transmission found in Dodge diesel trucks.
View DetailsTransmission Parts
This first gear fits all NV5600 Dodge diesel 6 speed transmissions. If you have an early (2001 & older) transmission you will have to use the updated lined synchronizer ring. There is a Dodge part number on the box for reference 05019907AA. This is an aftermarket part. We have used the same supplier for over [...]
View DetailsTransmission Parts
Cast Iron Tailhousing Transfer Case Adapter Dodge diesel NV4500 5 Speed Transmission
This is a cast iron tailhousing that fits a NV4500 5 speed transmission in the Dodge diesel trucks. This is much heavier that the factory aluminum piece and is a direct bolt on replacement. These have the 2 threaded holes on the side for the transfer case shifter, so they will fit all years.
View DetailsTransmission Parts
Front bearing retainer G56 Dodge diesel 6 speed transmission
This front bearing retainer fits all G56 6 speed transmissions in Dodge diesel applications. It is 3 bolt mounting. This is the snout that the throwout bearing rides on. It replaces the factory tin snout.
View DetailsTransmission Parts
This mainshaft fits all NV5600 2wd Dodge diesel 6 speed transmission. The box has a Dodge part number 05010049AA for reference. This is an aftermarket part. We have been using the same supplier on these for over 5 years without an issue.
View DetailsTransmission Parts
This input shaft fits all Dodge NV5600 6 speed transmissions with the 1 3/8″ clutch spline. It is made for use with the updated synchronizer rings.
View DetailsTransmission Parts
NV4500 cluster assembly early up to 1996 Dodge and GM 5:61 ratio
This cluster fits 1992-1996 Dodge and most GM NV4500 transmissions with the 22 tooth input shaft and 5:61 ratio.
View Details
Reviews
There are no reviews yet.